RSS

Konfigurasi DHCP server di UBUNTU Server

17 Jul

<!– @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } –>

Konfigurasi DHCP server di UBUNTU Server

Caranya :

  1. Login sebagai Super Administrator (sudo su)

  2. Installa DHCP server dengan perintah :

    # apt-get install dhcpd3-server -y

  3. Backup file dhcp3-server dengan perintah :

    # cp /etc/default/dhcp3-server /etc/default/dhcp3-server.backup

  4. Konfigurasi file dhcp3-server dengan perintah : # pico /etc/default/dhcp3-server

    Temukan bagian ini dan isikan interaces yang dijadikan sebagai LAN.

    INTERFACES=”eth1″

  5. Konfigurasi file dhcpd.conf dengan perintah : pico /etc/dhcp3/dhcpd.conf

    # Sample configuration file for ISC dhcpd for Debian

#

# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as

# configuration file instead of this file.

#

# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $

#

# The ddns-updates-style parameter controls whether or not the server will

# attempt to do a DNS update when a lease is confirmed. We default to the

# behavior of the version 2 packages (‘none’, since DHCP v2 didn’t

# have support for DDNS.)

ddns-update-style none;

#Perhatikan bagian ini defaulnya tanpa tanda pagar.

# option definitions common to all supported networks…

#option domain-name “example.org”;

#option domain-name-servers ns1.example.org, ns2.example.org;

#default-lease-time 600;

#max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local

# network, the authoritative directive should be uncommented.

#authoritative;

# Use this to send dhcp log messages to a different log file (you also

# have to hack syslog.conf to complete the redirection).

log-facility local7;

# No service will be given on this subnet, but declaring it helps the

# DHCP server to understand the network topology.

#subnet 192.168.1.0 netmask 255.255.255.0 {

#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {

# range 10.254.239.10 10.254.239.20;

# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;

#}

# This declaration allows BOOTP clients to get dynamic addresses,

# which we don’t really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {

# range dynamic-bootp 10.254.239.40 10.254.239.60;

# option broadcast-address 10.254.239.31;

# option routers rtr-239-32-1.example.org;

#}

# A slightly different configuration for an internal subnet.

subnet 192.168.1.0 netmask 255.255.255.0 {

#ip addres yang akan di sewakan oleh server

range 192.168.1.25 192.168.1.40;

#DNS server yang digunakan

option domain-name-servers 202.152.5.36;

# option domain-name “internal.example.org”;

option routers 192.168.1.20;

option broadcast-address 192.168.1.255;

default-lease-time 600;

max-lease-time 7200;

}

# Hosts which require special configuration options can be listed in

# host statements. If no address is specified, the address will be

# allocated dynamically (if possible), but the host-specific information

# will still come from the host declaration.

#host passacaglia {

# hardware ethernet 0:0:c0:5d:bd:95;

# filename “vmunix.passacaglia”;

# server-name “toccata.fugue.com”;

#}

# Fixed IP addresses can also be specified for hosts. These addresses

# should not also be listed as being available for dynamic assignment.

# Hosts for which fixed IP addresses have been specified can boot using

# BOOTP or DHCP. Hosts for which no fixed address is specified can only

# be booted with DHCP, unless there is an address range on the subnet

# to which a BOOTP client is connected which has the dynamic-bootp flag

# set.

#host fantasia {

# hardware ethernet 08:00:07:26:c0:a5;

# fixed-address fantasia.fugue.com;

#}

# You can declare a class of clients and then do address allocation

# based on that. The example below shows a case where all clients

# in a certain class get addresses on the 10.17.224/24 subnet, and all

# other clients get addresses on the 10.0.29/24 subnet.

#class “foo” {

# match if substring (option vendor-class-identifier, 0, 4) = “SUNW”;

#}

#shared-network 224-29 {

# subnet 10.17.224.0 netmask 255.255.255.0 {

# option routers rtr-224.example.org;

# }

# subnet 10.0.29.0 netmask 255.255.255.0 {

# option routers rtr-29.example.org;

# }

# pool {

# allow members of “foo”;

# range 10.17.224.10 10.17.224.250;

# }

# pool {

# deny members of “foo”;

# range 10.0.29.10 10.0.29.230;

  1. Jalan service dengan perintah :

    # /etc/init.d/dhcp3-server start

  2. Ujicoba dilakukan dengan mengoptainkan ip addres pada client.

  3. Oke selamat mencoba.

About these ads
 
Tinggalkan komentar

Ditulis oleh pada 17 Juli 2008 in Ubuntu

 

Berikan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Logout / Ubah )

Twitter picture

You are commenting using your Twitter account. Logout / Ubah )

Facebook photo

You are commenting using your Facebook account. Logout / Ubah )

Google+ photo

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

 
Ikuti

Get every new post delivered to your Inbox.

%d blogger menyukai ini: